YNX 12V LiFePO4 lithium batteries (200Ah-600Ah) are designed for high-capacity energy storage with Bluetooth-enabled BMS for real-time monitoring. They offer longer cycle life, lightweight construction, and stable power output for inverters, fishing boats, and off-grid systems. Their modular design allows scalability, while thermal stability ensures safety in extreme conditions.
What Are Emirates’ Lithium-Ion Battery Policies for Air Travel?
How Does YNX LiFePO4 Technology Compare to Traditional Batteries?
YNX lithium iron phosphate (LiFePO4) batteries provide 4x longer lifespan than lead-acid counterparts, with 3,000-5,000 cycles at 80% depth of discharge. They maintain consistent voltage output during discharge and weigh 70% less than equivalent lead-acid models. Unlike AGM/gel batteries, they deliver full capacity even at high discharge rates (up to 1C continuous).
Traditional lead-acid batteries suffer from progressive capacity loss and require frequent maintenance watering. In contrast, YNX’s lithium technology maintains 90% capacity after 2,000 cycles with zero maintenance. Energy density comparisons reveal LiFePO4 provides 120-160Wh/kg versus 30-50Wh/kg in AGM batteries. For marine applications, this translates to 58% less engine room space required for equivalent power storage. The table below illustrates key performance differences:
| Parameter | YNX LiFePO4 | Lead-Acid |
|---|---|---|
| Cycle Life | 5,000 cycles | 800 cycles |
| Charge Efficiency | 98% | 85% |
| Self-Discharge | 3%/month | 5%/week |
What Safety Mechanisms Prevent Thermal Runaway in YNX Batteries?
YNX employs three-tier protection: 1) Nano-porous ceramic separators (180°C melt point) 2) Pressure relief vents (activate at 15psi) 3) Multi-stage BMS with 1ms short-circuit response. Thermal runaway threshold is 350°C vs 200°C in NMC batteries. UL1973-certified cells feature 5mm flame-retardant casing and gas recombination chemistry.
What Is a DC to DC Lithium Battery Charger and How Does It Work
The multi-layered safety system actively monitors thermal gradients across cell groups, triggering automatic load disconnection if temperature variations exceed 8°C. During overcurrent events, pyrotechnic fuses isolate damaged cells within 0.8 milliseconds. For marine installations, the battery casing includes saltwater-resistant vent filters that prevent corrosive particle ingress while maintaining pressure equilibrium. Third-party testing shows YNX batteries withstand 24 hours of salt spray exposure (ASTM B117 standard) without performance degradation.
“YNX’s cell-level fusing and active balancing set new benchmarks in modular lithium systems. Their 200Ah cells maintain 95% capacity after 2,000 cycles at 1C discharge – critical for commercial solar installations. The Bluetooth BMS’s CAN bus integration allows seamless hybrid inverter communication, something rarely seen in entry-level batteries.” – Renewable Energy Systems Engineer
FAQ
- Can YNX Batteries Be Used in Parallel with Other Brands?
- No – mixing brands risks BMS communication errors and unbalanced charging. YNX requires same model/capacity batteries in parallel with factory-preset resistance matching.
- Does the Bluetooth BMS Work Without Internet?
- Yes – communication uses BLE 5.0 (30m range) without cellular data. Data logs store 180 days locally on your device.
- Are YNX Batteries Certified for Air Transport?
- Only ≤300Ah models meet IATA 965 Section II requirements. Contact YNX for UN38.3 test reports and 30% SOC pre-shipment configuration.